Mixer Rack Case

SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle

SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle
SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle
SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle

SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle

Furman's M-8Dx power conditioner, a part of the Merit Series, offers top-notch protection for your gear at a price point that doesn't break the bank - perfect for any rack system. Placing an M-8Dx in to the top slot of your rack, you've got access to eight switched outlets on the rear panel - including wall-wart spacings - to power and protect all your equipment, up to a 15-amp load. The M-8Dx features two slide out light fixtures. There's also a 3-digit LED voltmeter that displays incoming voltage on the M-8Dx. Sweetwater is an Authorized Furman + SKB Dealer.

SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle. 15-amp Power Conditioner with Wall-wart Spacing, 8 Rear Panel Outlets, 1 Front Panel Input, 2 Lights, and Digital Meter 10U over 4U DJ/VJ-style Equipment Rack with Side-access Panels and TSA-approved Locking Lid.

Furman M-8Dx Power Conditioner at a Glance. Instrument Rigs You've got a rack for your effects, preamps, tuner... And you're going to plug that into the wall? One big spike, and your rig is up in smoke.

Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With the M-8Dx's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Recording Can't track down where that noise is coming from? With the M-8Dx's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW.

Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

DJ Equipment Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. The M-8Dx's standard level protection and filtration keeps the bad stuff out. Pro Audio When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration.

It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Furman M-8Dx Power Conditioner Features. Maximum Output Current: 15 amps.

Captive, 14 AWG, with 3-conductor Edison plug. Lamps: Two 120V incandescent bulbs, 4 watts each. Spike Protection Mode: Line to neutral. Peak Impulse Current: 12,000 amps. Maximum Continuous Operating Voltage: 130 VAC RMS.

Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 MHz. Dimensions: 1.75" H x 19" W x 7.5 D. Protect your gear while protecting your budget with the Furman M-8Dx! Here's an equipment rack that's perfect for laptop-based DJs and video rigs!

SKB's 1SKB-R104 portable equipment rack has all of the useful features that make it ideal for small rigs with big routing needs. The 1SKB-R104 is a roto-molded rack made of Linear Medium Density Polyethylene (LMDPE) that's though enough to shake off the wear and tear of the gigging life. The 1SKB-R104's 4U front is perfect for your power conditioner, dynamic processor, and effect unit, or any other rack gear. A 10U slanted top gives you plenty of space for your mixer or DJ-style control surface.

A pair of handy side ports give you easy access for advanced cable-routing setups. And the 1SKB-R104's spacious lid is deep enough to lock on securely even with the optional AV-8. SKB 1SKB-R104 DJ-style Portable Equipment Rack Features at a Glance.

10U slanted top and 4U front. Hard lid and doors made of Injection molded of Rubber Modified Styrene (RMS) keep your gear safe. Side access ports allow for advanced cable routing. Lid has enough space to close even with an optional AV-8 folding shelf. One-piece base built of roto-molded Linear Medium Density Polyethylene (LMDPE). Two TSA locking SKB patented trigger latches secure the lid. Flat hard top allows for stacking in transport and storage. The SKB 1SKB-R104 keeps your gear safe and your setup time short! M-8Dx 15A 8+1 Outlet Power Conditioner Specifications.

8 x Rear, 1 x Front. LED voltage meter, protection indicator.

More than 30 years in business. Free tech support from audio experts. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Cases, Racks & Bags". The seller is "sweetwatersound" and is located in this country: US.

This item can be shipped to United States, Canada.

  • Type: Not Available
  • Brand: Furman + SKB

SKB 1SKB-R104 10U x 4U Mixer Rack Case + Furman M-8Dx Value Bundle